Belt Conveyor Straight Center Drive + Feed BM8433/8443

The belt conveyor with feed is used for transporting all types of unit loads in case of inclines or declines. The feed enables a smooth transition at the lower kink of the belt conveyor, e.g., at the interface with a roller conveyor.The standard belt conveyor is equipped with a drum motor (BM 8443), a gear motor is available as an option (BM 8433). Not suitable for reversing operation.

General Technical Data

Max. load capacity	50 kg/m. The combination of maximum values is not always possible
Max. load capacity per module	550 kg. The combination of maximum values is not always possible.
Conveyor speed	0.1 to 2.5 m/s. The combination of maximum values is not always possible.
Incline/decline	Max. 18°
Ambient temperature	0 to +40 °C
Rated voltage	400 V
Electrical power	Max. 3 kW
Motor type	Drum motor/gear motor
Conveyor belt	2-layer, PVC, grooved longitudinally
Slider bed	Sheet steel 2 mm

Dimensions

Rated width BF	420, 620, 840 mm, others on request
Lane width LW	BF (+120/–90 mm per side with flexible side guide)
Module length CL	1500 to 20,010 mm
Top length TL	720 to 1020 mm
Module width TW	BF + 80 mm
Side guide height HSG	35 - 65 mm
Incline/Decline angle a	6°/9°/12°/15°/18°

	BM8433_8443_EN.pdf
	(pdf. 201 KB)

Downloads